5 Ways To Beat Blisters On The Tops Of Your Toes

by Rebecca Rushton

Clawed toes and hammertoes make the toe joints sit up higher and are more susceptible to blisters on top of toes. This can be a structural thing - the toes are fixed in this position. Or it can be a functional thing - the toes are perfectly able to straighten, but when you walk and run, they bend over.

Whether structural or functional, there are 5 ways you can stop these blisters from forming.

5 Ways To Beat Blisters On The Tops Of Your Toes

Hammertoes with prominent toe joints on top of toes


The 5 ways to prevent blisters on top of toes

1. Shoe toe box depth

Let’s talk shoe fit, specifically for these blisters:

  • The depth of your toe box simply must accommodate your toes. You can’t expect to be pain-free or blister-free without this important aspect of shoe fit being met.
  • Tie your laces firmly to prevent your foot slipping forward into a shallower part of the toe box.
  • Shoes with a more flexible upper in the toe box region will help.
  • Seams across the prominent toe joints are going to make this worse.
toebox depth Toebox depth


2. Taping

The skin on the top of the toes is easily abraded if it rubs against the top of the toe box. Tape can provide a protective layer to minimise that abrasive rubbing, helping to stop abrasions and blisters. Although a non-stretch tape will help distribute shear load better, a stretchy tape is easier to apply without leaving creases - it’s difficult but important for this area. A good toe taping technique (one that is most likely to stay intact) involves closing in the end of the toe. Take one piece of tape over the toe from bottom to top, and another around the toe so the tape ends meet at the top of the toe.

tape to prevent blisters on top of toes
Toe taping


Fixomull Stretch tape
Fixomull Stretch tape - Learn more


    3. Change toe posture

    The toes can adopt a clawed posture for a number of reasons. If it’s a fixed deformity, you’ll need to hope that the other options explained here do the trick. Otherwise, your only option might be to have the toes surgically straightened. If your toes can straighten, a podiatrist may be able to do something to encourage your toes to maintain this straighter posture. This could involve orthotics, stretches, toe devices or other treatments. Toe props can be used to take up the space under the toes and prevent them bending over so much. While the toe prop is in place, the toes will sit straighter, making the joints on top less prominent. Athletes should experiment with these to ensure the material between the toes doesn’t irritate in any way, particularly over long distances.

    off-the-shelf toeprop to stop blisters top of toesOff-the-shelf toe prop (elastic over the toe to hold it in place).


    custom made toeprop to stop blisters top of toes

    Custom-made toe prop (held in place with contouring and apposition of toes).


    4. Gel toe protector (sleeve or cap)

    A gel toe cover will both cushion the prominent joints and absorb a large amount of the shear that causes blisters. These devices are a little bulky, so it could get tricky if you need protection for two or more toes on the same foot - there might not be enough room in your toe box to accommodate them. Whether you choose a silicone gel toe sleeve (open at the end) or silicone gel toe cap (closed in at the end) is up to you. Considering your blister is on the top of the toe, you only need the open-ended sleeve, like the one pictured below. Being open at both ends will have the added advantage that sweat can escape from both ends, minimising the chance of skin maceration. But if your toe is bent over and you’d also like to protect the tip of the toe, consider a closed-in cap.

    gel toe sleeve to prevent blisters above toesGel toe sleeve (open at both ends)


    Gel toe sleeves Gel toe sleeves - Learn more
    Gel toe caps
    Gel toe caps - Learn more




    5. ENGO blister patch

    When gel toe protectors are not an option, an ENGO patch applied to the inside of the toe box is an excellent way to reduce friction levels at the tops of the toes. This is especially the case if you feel like you’ve done everything you can with shoe fit and the posture of your toes. Remember that if your shoe upper is permeable to water, the patch could dislodge if it gets too wet.

    Stop blisters on top of toes with an Engo blister patchAn ENGO large oval patch on the inner toe box of the shoe to protect against blisters on top of the toes. The shoe has been cut in half.


    https://www.blisterprevention.com.au/collections/all/products/engo-4-pack ENGo Blister Patches (4-Pack) - Learn more



    Number 1 is a must. You'd be silly not to try number 2, but don't be too surprised if it doesn't help enough. Simply move on to number 3 or 4. Both can work fantastically, I highly recommend them. But don't use both at the same time, it's one or the other. And leave number 5 up your sleeve in case there's some reason you can't use the others.


    Already got a blister? Learn the basics of proper blister treatment to heal it faster.

    Rebecca Rushton
    Rebecca Rushton


    Podiatrist, blister prone ex-hockey player, foot blister thought-leaderauthor and educator. Can’t cook. Loves test cricket.

    Leave a comment

    Also in Blister Blog

    How To Hold A Toe Straight With Strapping
    How To Hold A Toe Straight With Strapping

    by Rebecca Rushton BSc(Pod)

    Here's a quick video to show how to strap a curly little toe to stop it bending under the next one and getting blisters on it. Learn the technique and understand the pros and cons to decide if this is worth trying on your toe.

    View full article →

    Why Do I Wear Holes In The Back Of My Shoes?
    Why Do I Wear Holes In The Back Of My Shoes?

    by Rebecca Rushton BSc(Pod)

    Ever worn holes in the back of your shoes before the rest of the shoe wears out. It’s kind of annoying (and expensive). Here why it happens and a few ways to fix it.

    View full article →

    At night, remove all dressings from the blister to expose the area to the air. This will speed up healing.
    Should A Blister Be Exposed To The Air To Dry Out, Or Bandaged?

    by Rebecca Rushton BSc(Pod)

    Leaving your blister open to the air to dry out and scab over is either counterproductive (deroofed and torn) or inconsequential (intact). It is certainly not beneficial to any blister, only maceration. Here's why.

    View full article →