Is It A Pressure Blister Or Friction Blister [Or Both]?

by Rebecca Rushton

Why do we call them friction blisters, not pressure blisters? 

Pressure doesn’t cause blisters! But it is part of the problem. Let me show you why:

STEP 1: Press the tip of your right index finger firmly on the back of your left hand.

STEP 2: Wobble it back and forth but keep it stuck to the same bit of skin. Notice how your skin stretches? This is shear and this is what causes blisters.

 

Here’s the relevance of pressure to blisters

STEP 3: Wobble back and forth again but this time press softly with your finger tip. Notice how there is less shear. Low pressure allows your fingertip to slide across the skin before shear becomes excessive. High pressure sees your fingertip remain stuck to your hand for longer which causes a lot more shear.

Significance: Pressure enables shear to reach blister-causing levels (Carlson, 2006).

Pressure contributes to the coefficient of friction

Is It A Pressure Blister Or Friction Blister [Or Both]?
Where pressure fits in to the blister prevention flowchart.

 

But wait … there’s more (Step 4)

STEP 4: Put a drop of oil on the back of your hand (reduce friction) and wobble your fingertip back and forth again - with really firm pressure. I’m doing it now and I can compress the tissues like crazy yet only a tiny bit of shear is produced! You have to do this to believe it. 

So it’s not just about pressure. Nor is it just about friction. It’s the combination of the force of contact (aka pressure) and friction that leads to the friction conditions (known as the coefficient of friction) that will determine the degree of shear.

BUT, it seems friction is the bigger factor. Carlson in 2006 explains how Naylor’s research in 1955 found that when friction loads were doubled, damage occurred three times as fast – this was with no change in pressure.

 

Conclusion

It’s a common error to implicate pressure as THE cause of blisters. Here’s a word from the late Paul W Brand, an expert on shear and tissue damage, that provides some perspective:

"There are two types of force which occur on the sole of the foot, one is vertical force at right angles to the foot, which causes direct pressure on the tissues. The other is horizontal force, or shear stress, which is parallel to the surface of the foot and occurs in association with acceleration and deceleration. Of the two forces shear stress is more damaging than pressure" (Paul W Brand MD, 1983).

 

Take home message

Blisters are not just about pressure. Excessive pressure can not cause a blister in the absence of friction. Pressure and friction are mutually dependent in producing shear. We often concentrate exclusively on pressure reduction. We shouldn’t. Because it can be easier and more effective to reduce friction!





Rebecca Rushton
Rebecca Rushton

Author

Podiatrist, blister prone ex-hockey player, foot blister thought-leaderauthor and educator. Can’t cook. Loves test cricket.


Leave a comment


Also in Blister Blog

How To Treat Blisters On Feet: Avoid These Blister Treatment Fails [Warning: Graphic]
How To Treat Blisters On Feet: Avoid These Blister Treatment Fails [Warning: Graphic]

by Rebecca Rushton

It's difficult to get people to take blister treatment seriously. So we're starting this article with 6 blister treatment fails that show you why it's important to treat a blister on your foot properly. 

 

View full article →

black toenail big toe
How To Treat Black Toenails

by Rebecca Rushton

Some black toenails are painless, others are extremely painful. Releasing the blood brings instant relief. You can do this quite easily and painlessly by drilling a hole in the nail with a hypodermic needle.

 

View full article →

Gel toe protectors: gel toe caps and toe sleeves
Gel Toe Protectors: Gel Toe Caps & Toe Sleeves

by Rebecca Rushton

I like to say Gel Toe Protectors are 100x better than taping for blister. There are two reasons why. But gel toe caps & toe sleeves do have their downsides.

 

View full article →